Vag908USBDriver64bit
Vag908USBDriver64bit
Vag908USBDriver64bit is a driver that allows you to connect your VAG-COM 908 diagnostic cable tool to your Windows computer via a USB port. VAG-COM 908 is a software that enables you to perform various diagnostic functions on Volkswagen, Audi, Seat and Skoda vehicles, such as reading and clearing fault codes, measuring values, output tests, adaptations and coding.
Vag908USBDriver64bit is compatible with Windows 2000 and newer versions, including Windows XP, Vista and 10. It supports the new UDS/ODX/ASAM protocol, which is required for some newer models of vehicles. It also supports the TP1.6 protocol, which is used by the 6J Ibiza model.
Download Zip: https://8nistcharhiema.blogspot.com/?download=2w2VW5
To install Vag908USBDriver64bit, you need to follow these steps:
Download the driver from the official website of Ross-Tech or from a reliable source. Unzip the contents of the download into a new folder.
Plug in your VAG-COM 908 interface to your computer via a USB port. Find it in Device Manager under "Other devices" or "Ports (COM & LPT)". Right-click it and select "Update Driver".
Tell the wizard not to search, but to let you specify what driver to install. Then click on "Have Disk" and browse to the folder where you unzipped the driver files. Select the appropriate driver for your system (32-bit or 64-bit).
Once the driver is installed, you may need to change the COM port number assigned to the interface. To do this, go to Device Manager, open the properties sheet for the USB Serial Port, click on the Port Settings tab, and then click on the Advanced button. Choose a COM port number between 1 and 4, as some applications may not support higher numbers.
Make sure that the Load VCP option is checked in the Advanced tab. This will enable the driver to emulate a serial COM port for third-party applications that expect to communicate via a serial port. If it is not checked, check it and then disconnect and reconnect the interface.
After installing Vag908USBDriver64bit, you can use your VAG-COM 908 software to diagnose your vehicle. You can also use other applications that are compatible with the driver, such as VCDS-Lite or VCDS-Mobile. However, you should be aware that Ross-Tech does not offer installation support or guarantee for these third-party applications.
Vag908USBDriver64bit is a useful driver that allows you to connect your VAG-COM 908 interface to your Windows computer via a USB port. It supports the latest protocols and models of vehicles and enables you to perform various diagnostic functions with ease.